- This is typical of when the instrument is running in the "regulated" flow rate. This mode is for when there is insufficient CFM (air flow rate) from the compressor to run the LM10 continuously, the pause gives the compressor time to catch up. Check the pages on the touch screen and verify the running mode.
- If it is in "regulated" then switch to "free" mode.
- If it is still in free mode, we may need to remote diagnose further and possibly come to inspect.
LM10 running in 2-stroke bursts Print
Modified on: Thu, 5 Oct, 2023 at 1:33 PM
Did you find it helpful? Yes No
Send feedbackSorry we couldn't be helpful. Help us improve this article with your feedback.